SE-82-6 Battery Charger Manual

The SE-82-6 is a professional-grade 6-bay battery charger designed for simultaneous charging of multiple battery types including Ni-MH, Ni-Cd, and Li-ion. Features include individual channel monitoring, LCD display with charge status, adjustable charging current, overcharge protection, temperature monitoring, and automatic shut-off. Powered by 100-240V AC, 50/60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Batteries 7. Charging Operations 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 6 independent charging bays, LCD status display, Power button, Mode selection, Current adjustment, Battery type selector, AC power input.

Feature	Description
Independent channels	6 separate charging circuits for individual battery monitoring
LCD display	Shows charging status, voltage, current, and time for each bay
Battery type selector	Supports Ni-MH, Ni-Cd, and Li-ion batteries
Current adjustment	Adjustable charging current from 200mA to 2000mA per channel
AC power input	Universal 100-240V AC input
Temperature sensor	Monitors battery temperature during charging
POWER	Turns charger on/off
MODE	Selects charging mode (Standard, Fast, Trickle)
DISPLAY	Cycles through display information
RESET	Resets individual channel or entire unit

Installation

Unpack and inspect contents. Place on stable, flat surface away from heat sources.

Connect power: Plug AC adapter into wall outlet (100-240V).
Position charger: Ensure adequate ventilation on all sides.
Check connections: Verify power cable is securely connected.
Power on: Press POWER button to initialize charger.

WARNING! Do not place near flammable materials. Ensure proper ventilation during operation.

First-Time Setup

Power on charger; follow initial setup procedure.

Set language: Press and hold MODE for 3 seconds to select language (default ENGLISH).
Configure defaults: Use DISPLAY button to set preferred charging parameters.
Test empty bay: Insert known good battery to verify operation.
Calibrate if needed: Follow calibration procedure in advanced settings.

CAUTION! Only use with recommended battery types. Incorrect battery types may cause damage.

Specifications

Channels: 6 independent charging bays.
Input Voltage: 100-240V AC, 50/60Hz.
Output: DC 1.2V-4.2V per channel.
Charging Current: 200mA-2000mA adjustable per channel.
Supported Batteries: Ni-MH (1.2V), Ni-Cd (1.2V), Li-ion (3.6V/3.7V).
Display: Backlit LCD with status indicators.
Protection: Overcharge, short circuit, reverse polarity, temperature monitoring.
Dimensions: 8.5 x 4.2 x 1.8 inches.
Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Settings

Access settings via front panel buttons. Front Panel: POWER, MODE, DISPLAY, CHANNEL SELECT, CURRENT ADJUST.

Display Indicators: Charging (flashing), Complete (solid), Error (red), Temperature (icon).

Charging Modes: STANDARD (default), FAST (reduced time), TRICKLE (maintenance). Battery Type: Select per channel (Ni-MH, Ni-Cd, Li-ion). Current Settings: Adjust per battery capacity (200mA for AAA, 1000mA for D, etc.). Advanced: Calibration, timer settings, display brightness.

Connecting Batteries

Each bay accepts AA, AAA, C, D, and 9V batteries with appropriate adapters.

Check battery type: Ensure battery is supported (Ni-MH, Ni-Cd, Li-ion).
Insert correctly: Align positive (+) and negative (-) terminals.
Select channel: Press CHANNEL SELECT to choose bay.
Set parameters: Choose battery type and charging current.
Start charging: Charging begins automatically when parameters are set.

Tip: Clean battery contacts before inserting for optimal charging.

Charging Operations

Supports simultaneous charging of different battery types and sizes.

Insert batteries: Place batteries in desired bays.
Select mode: Press MODE to choose charging speed.
Monitor progress: LCD shows voltage, current, and estimated time remaining.
Automatic completion: Charger switches to trickle/maintenance when full.
Remove batteries: When charging complete indicator lights solid.
Mixed charging: Different battery types can be charged simultaneously.
Storage mode: Maintains batteries at optimal charge during storage.
Refresh function: Discharges and recharges to restore capacity.

WARNING! Do not leave batteries charging unattended for extended periods. Remove when charging complete.

Safety Features

Overcharge Protection: Automatically stops charging when battery reaches full capacity. Temperature Monitoring: Halts charging if battery temperature exceeds safe limits. Reverse Polarity Protection: Prevents damage from incorrectly inserted batteries. Short Circuit Protection: Safeguards against electrical shorts.

Care & Cleaning

Unplug before cleaning. Use dry, soft cloth to wipe exterior. Use cotton swab with isopropyl alcohol for contact cleaning.

CAUTION! Never immerse in water. Avoid abrasive cleaners that may damage display.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE Certified: Meets European safety standards. RoHS Compliant: Free of hazardous substances. Copyright © 2025 SE Electronics; trademarks of SE Industrial Group. For support, visit www.se-electronics.com or contact 1-800-555-CHARGE.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Battery not charging	Incorrect insertion	Check polarity; ensure battery is properly seated.
Charger not powering on	Power connection	Check AC adapter connection; try different outlet.
Overheating	Ventilation blocked	Ensure adequate airflow; move to cooler location.
Error indicator lit	Battery fault	Remove battery; check for damage or expiration.
Slow charging	Current setting low	Increase charging current for larger batteries.
Display not visible	Backlight off	Press and hold DISPLAY to adjust brightness.

Reset: Press and hold RESET for 5 seconds to restore factory defaults.

Service: 1-800-555-CHARGE; www.se-electronics.com/support