Installation Guide
Tools Needed:
- Adjustable wrench set
- Voltage tester
- Screwdrivers (flat and Phillips)
- Wire strippers
- Electrical tape
Step-by-Step Installation
- Choose Installation Location: Select a dry, well-ventilated location away from direct sunlight and moisture sources.
- Unpack and Inspect: Remove all packaging materials and inspect the unit for any shipping damage.
- Mounting Preparation: Ensure mounting surface is solid and can support the unit's weight (refer to specifications).
- Electrical Connection: Connect to appropriate power supply as specified in the electrical requirements section.
- Grounding: Properly ground the unit according to local electrical codes and regulations.
- System Integration: Connect to your existing power system following the wiring diagram provided.
- Initial Test: Perform initial power-up test following the startup procedure in the manual.
Specifications
| Model Series | SB4P-1000 |
| Type | Professional Power Management System |
| Color | Industrial Gray / Black |
| Power Capacity | 4000W Continuous |
| Noise Level | 45 dB at 1 meter |
| Control Type | Digital Touch Controls with LCD Display |
| Efficiency Rating | 95% (Peak Efficiency) |
| Input Voltage Range | 90-264V AC |
| Output Voltage | 120V/240V AC, 12V/24V DC |
| Dimensions (HxWxD) | 45 x 30 x 25 cm |
| Weight | 18.5 kg |
| Operating Temperature | -10°C to 50°C |
Warranty Information
- Full Warranty: 3 years parts and labor
- Power Module Warranty: 5 years on main power components
- Additional Coverage: Optional extended warranty available
For warranty service, contact Schumacher Customer Service at 1-800-621-5485 or visit SchumacherPower.com
Key Features
Quad Power Technology
Schumacher's innovative Quad Power system provides four independent power channels for maximum flexibility and reliability in demanding applications.
Smart Power Management
Advanced microprocessor control constantly monitors and adjusts power output for optimal efficiency and protection against overload conditions.
Multi-Stage Charging
Intelligent 8-stage charging algorithm ensures complete and safe charging of all battery types while extending battery life.
Pure Sine Wave Output
Clean, stable pure sine wave output protects sensitive electronics and ensures compatibility with all types of equipment.
Remote Monitoring
Wi-Fi and Bluetooth connectivity allows remote monitoring and control via smartphone app, with real-time status updates and alerts.
Automatic Voltage Regulation
Built-in AVR maintains stable output voltage regardless of input fluctuations, protecting connected equipment.
Operating Modes Explained
Standby Mode
Low-power monitoring state with instant response to power demands
Charging Mode
Intelligent battery charging with temperature compensation
Power Supply Mode
Continuous clean power output for sensitive equipment
Backup Mode
Automatic switchover during power outages with zero transfer time
Boost Mode
Enhanced power output for high-demand applications
Eco Mode
Energy-saving operation with intelligent power management
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit won't power on | Power issue, circuit breaker tripped | Check power supply, reset circuit breaker, check fuses |
| Low power output | Overloading, input voltage low, overheating | Reduce load, check input voltage, ensure proper ventilation |
| Frequent shutdowns | Overheating, overload condition, faulty cooling | Check ventilation, reduce load, inspect cooling system |
| Display errors | Software glitch, display connection issue | Reset unit, check display connections, update firmware |
| Unusual noises | Cooling fan issue, loose components | Check cooling fan, tighten all internal connections |
| Not charging batteries | Battery connection issue, wrong battery type | Check battery connections, verify battery compatibility |
Error Codes
- E01: Overvoltage protection - Check input voltage
- E02: Undervoltage protection - Check input voltage
- E03: Overload condition - Reduce connected load
- E04: Overheating - Ensure proper ventilation
- E05: Battery fault - Check battery connections
- E06: Fan failure - Check cooling system
Manual Downloads
Current Model Manuals
SB4P-1000
Built 4 Power Professional
SB4P-800
Built 4 Power Standard
SB4P-1200
Built 4 Power Industrial
SB4P-600
Built 4 Power Compact
Popular Previous Models
SP3-1000
Professional Power System
SP2-800
Advanced Power Manager
SP4-1200
Industrial Power Center
SP1-600
Compact Power Unit