Installation Guide
Tools Needed:
- Safety glasses
- Adjustable wrench
- Wire cutters/strippers
- Screwdrivers (flat and Phillips)
- Multimeter
Step-by-Step Installation
- Choose Installation Location: Select a well-ventilated, dry location away from flammable materials and direct sunlight.
- Safety Precautions: Wear safety glasses and remove all jewelry before handling batteries.
- Battery Preparation: Clean battery terminals and ensure battery is securely mounted in vehicle or on stable surface.
- Connect Charger: Connect RED clamp to POSITIVE (+) terminal first, then BLACK clamp to NEGATIVE (-) terminal.
- Power Connection: Plug charger into a properly grounded 120V, 60Hz outlet. Do not use extension cords.
- Settings Selection: Select appropriate charging mode based on battery type (Standard, AGM, Gel, Deep Cycle).
- Initial Test: Monitor charger for first 15 minutes to ensure proper operation and no overheating.
Specifications
| Model Series | SC1359 Professional Series |
| Type | Fully Automatic Battery Charger |
| Color | Black / Yellow |
| Charging Capacity | 2/10/50/200 Amp |
| Battery Compatibility | 6V/12V Standard, AGM, Gel, Deep Cycle |
| Display Type | Digital LCD with LED Indicators |
| Engine Start | 200 Amp Engine Start Function |
| Input Voltage | 120V AC, 60Hz |
| Output Voltage | 6V/12V DC |
| Dimensions (HxWxD) | 30 x 25 x 18 cm |
| Weight | 8.2 kg |
| Safety Features | Reverse Polarity, Overheat, Short Circuit Protection |
Warranty Information
- Full Warranty: 3 years parts and labor
- Microprocessor Warranty: 5 years on control board
- Additional Coverage: Optional extended warranty available
For warranty service, contact Schumacher Customer Service at 1-800-621-5485 or visit SchumacherElectric.com
Key Features
Fully Automatic Operation
Advanced microprocessor automatically selects optimal charging rate and switches to float mode when battery is fully charged, preventing overcharging.
Multi-Stage Charging
Four-stage charging process (Bulk, Absorption, Analysis, Float) ensures complete, safe charging and extends battery life.
Battery Recondition Mode
Special mode helps recover deeply discharged batteries by applying controlled charging pulses to break down sulfate crystals.
200 Amp Engine Start
Powerful engine start function provides instant power to start vehicles with dead batteries in emergency situations.
AGM/Gel Compatible
Special charging algorithms for AGM (Absorbent Glass Mat) and Gel cell batteries prevent damage from overcharging.
Digital Display
Bright LCD shows charging status, voltage, amperage, and battery condition for precise monitoring.
Charging Modes Explained
Standard Charge
For regular lead-acid batteries, provides 10 amp charge with automatic completion
AGM Mode
Special algorithm for AGM batteries with controlled voltage to prevent gassing
Deep Cycle
Extended absorption phase for deep cycle marine/RV batteries
Battery Recondition
Desulfation mode to recover old or sulfated batteries
Engine Start
200 amp boost for starting vehicles with dead batteries
Maintenance Mode
Float charging for long-term battery maintenance
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger won't turn on | No power, blown fuse, faulty outlet | Check power supply, replace fuse if needed, try different outlet |
| Not charging battery | Bad connections, dead battery, wrong settings | Check clamp connections, test battery voltage, verify settings |
| Charger overheating | Ventilation blocked, high ambient temperature | Ensure proper ventilation, move to cooler location |
| Error lights flashing | Reverse polarity, bad battery, internal fault | Check connection polarity, test battery, contact service |
| Slow charging | Low input voltage, battery sulfation, small gauge wires | Check outlet voltage, use recondition mode, check wire size |
| Engine start not working | Battery completely dead, poor connections, safety timeout | Charge battery first, clean connections, wait 3 minutes between attempts |
Error Codes & Indicators
- Red LED Flashing: Reverse polarity detected - Check connections
- Yellow LED Solid: Charging in progress - Normal operation
- Green LED Flashing: Battery maintenance mode - Charging complete
- Red/Yellow Alternating: Battery fault - Test battery condition
- All LEDs Flashing: Overheat condition - Allow to cool
- No LEDs: Power issue - Check power source and fuse
Manual Downloads
Current Model Manuals
SC1359
Professional Series 50/10/2/200A
SC1325
Professional Series 30/10/2A
SC1307
Professional Series 15/2A
SC1281
Professional Series 100/25/2A
Popular Previous Models
SC1200A
SpeedCharge 12/2A
SC1004
Industrial Series 40/10A
SC8002
Maintainer Series 2A
SC6002
Portable Series 6/2A